The tamanu tree grows along the coast of Vietnam, most of all in the central region and the south. Its seeds yield a deep green oil, thick, with a warm roasted nut scent. A bottle of tamanu oil holds two different parts: a fatty oil like any plant oil, and a resin fraction carrying molecules found only in the genus Calophyllum. This piece records the tree, the seed, the two parts of the oil, and how Lê Mai uses it in soap.
The tamanu tree along Vietnam's central coast
Tamanu, Calophyllum inophyllum, belongs to the family Calophyllaceae. Its natural range spans the Old World tropics, from Africa through Asia to Australia and Polynesia. In Vietnam, Đỗ Tất Lợi's reference work on Vietnamese medicinal plants records the tree growing wild and cultivated in many provinces, from Quảng Ninh, from Quang Binh down to Phan Thiết, and in many southern provinces such as Vinh Long, Mỹ Tho and Bà Rịa; wild trees usually grow on sandy coastal soil.
Đỗ Tất Lợi also records the tree as about 10 to 15 metres tall; foreign references give 8 to 20 metres, sometimes more. The flowers are white, large and fragrant, in clusters at the leaf axils or branch tips, opening from February to June. The fruit is a round drupe about 2.5 centimetres across, ripening pale yellow from October to December. Inside is a hard seed holding an oil rich kernel.
Tamanu has long been part of coastal life. Đỗ Tất Lợi records that its timber was used to build boats and masts; the seed oil was burned in lamps, and people in central Vietnam often planted the tree to press its seeds for lamp oil. The same book also notes that the oil can be used to make soap.
The seed and how the oil is taken
A fresh tamanu kernel does not yield its oil straight away. An ingredient profile from Soap Queen records that the kernel is dried in the sun for about a month, until it becomes sticky and full of a thick, dark oil. Oil producers give longer drying times, from about four to eight weeks, during which the kernel darkens towards brown. The kernels must be kept out of rain and damp throughout.
Đỗ Tất Lợi records that the seeds contain 41 to 51 percent oil. The crude oil is very thick, dark green, with a distinctive smell and a bitter taste. When the resin is removed, the oil becomes more fluid and turns yellow brown. The deep green colour and the characteristic smell of tamanu oil therefore travel with the resin fraction, not with the fatty oil.
The crude oil also has a very high acid value. Studies using tamanu oil for biodiesel measured about 56 to 59 mg KOH per gram of crude oil, equal to about 28 percent free fatty acids in one study. In other words, a significant part of the fatty acids in crude tamanu oil has already separated from its glycerin backbone before it ever meets alkali.
Two parts in one drop of oil
The first part is triglyceride, as in any plant oil. Two analyses of tamanu seed oil from the Philippines and from Hainan record about 39 to 42 percent oleic, about 27 to 33 percent linoleic, and about 13 to 16 percent each of palmitic and stearic acid. Other samples give quite different figures depending on origin and pressing, but the shared pattern is an oil rich in both oleic and linoleic acid, with roughly a quarter to a third saturated fatty acids.
The second part is resin. A 2018 review of tamanu oil records the resin fraction at about 10 to 20 percent, mainly neoflavonoids and pyranocoumarin derivatives. In oil from French Polynesia, that review names calophyllolide, inophyllums C, D, E and P, calanolides A, B and D, and the tamanolides. These are coumarins, a family of molecules carrying a lactone ring, which is an ester closed into a ring.
Calanolide A has a history of its own. It was described by Kashman's group in 1992 from the leaves and twigs of a related species, Calophyllum lanigerum, and later recorded in several other Calophyllum species, tamanu among them. Describing calanolide A as one of the two main compounds of tamanu oil is therefore not accurate: it is only one of many molecules in the resin fraction, and its amount varies with the source of the oil.
On skin · texture and testing first
Tamanu oil is thick and sticky. Soap Queen notes that the oil can separate in cold weather and simply needs gentle warming to recombine. Because of that texture, it is usually blended with a lighter carrier such as jojoba rather than used neat. A few drops are warmed between the palms before applying.
Tamanu oil is not without risk. In 2004, the journal Contact Dermatitis published a case of allergic contact dermatitis from tamanu oil; in 2022, another report in the same journal described a person with widespread eczema after applying the oil, with a positive patch test at 1 percent, and the authors called the reaction rare. Some references also class tamanu as a tree nut oil, so people allergic to tree nuts should be cautious.
The safe approach is the familiar one: dilute, test first on a small area on the inner forearm, wait a day, and only then use it more widely. For young children, during pregnancy, or on skin that already has a problem, ask a doctor first.
Tamanu in the lye pot
In soap, the triglyceride part of tamanu goes through the same reaction as every other oil: NaOH cleaves the ester bonds, forming sodium salts of fatty acids and glycerin. The free fatty acids need no cleaving: they meet NaOH and become soap through a simple acid base neutralisation. Both routes use alkali, and the SAP calculator already counts them in the batch's NaOH.
The colour of the bar is not what many people expect. Soap Queen made a batch with 5 percent tamanu oil and recorded a bright yellow bar, not green or brown. The same article recommends using tamanu at 5 percent or below and avoiding cool colours, because the oil's yellow will show through.
The resin fraction has a less predictable fate. Coumarins carry a lactone ring, and in principle that ring is also an ester that alkali can open; none of the sources consulted includes a study measuring how much of tamanu's resin fraction remains after saponification. What is more certain is the scent: soap makers note that tamanu's warm nutty smell can still be noticed on a cured bar, fading over time like every other scent.
Tamanu in Lê Mai soaps
Lê Mai uses tamanu at two levels. At the high level, Tea Tree and Oatmeal Artisanal Soap No.097 has 30 percent tamanu oil and 10 percent neem oil among 15 ingredients, with shea butter, cocoa butter, tea tree essential oil and oat powder. Tamanu and Neem Leaf Artisanal Soap No.096 also uses 30 percent tamanu oil; its product description records a mossy green bar, quite unlike the yellow of a batch with only a little tamanu. The two strongly scented oils stand side by side, as the piece on neem oil describes.
At a lower level, tamanu is one of many oils in a formula. Thyme Artisanal Soap No.005 has 12 ingredients, more than 30 percent almond oil, with shea butter, cocoa butter, tamanu oil and neem oil; the product description does not give a separate share for tamanu. The colour and scent of the bar come mainly from the dried thyme powder and the essential oil, as the piece on dried thyme records.
A bar of soap touches the skin for about 30 to 60 seconds each bath, then is rinsed away. During that time, tamanu is part of the lather, not a layer of oil left on the skin as when it is applied. That is why the same oil can be used at 30 percent in a soap bar and still needs dilution when applied on its own.
A tree by the coast. A dried fruit. A deep green oil.
The fatty part becomes soap. The resin carries the green and the nutty scent.
Tamanu was there before Lê Mai knew of it. Still there. Still giving oil.